Hello! Here is a fun way to say hi to a friend! Send a pot of forever flowers! I used the Heartfelt Creations Dogwood stamp and die set along with their older discontinued flower pot set. Pair with a doily from Cheery Lynn Dies and you have a fabulous forever flowers card!

dogwood flower pot card front view

Supplies:  Heartfelt Creations (HFC) Dogwood flowers stamp and coordinating dies, HFC birds and blooms bird die and stamp, HFC flower pot, tag, and vine leaf stamps and dies, a hello stamp, Marianne Creatables  swirl stamp, black embossing powder, versa mark watermark ink, Staz-On Brown, Distress Ink: picked raspberry, lemonade, peeled paint, mowed lawn, forest green, vintage photo, persimmon, Cheery Lynn doily die, terracotta paper (recollections) white cardstock, 140# cold press watercolor paper, ribbit prills, jute string.

Directions: Cut a flower pot twice, stamp front with the swirl stamp and watermark ink, heat emboss. Shade edges of the pot with vintage photo Distress Ink. Die cut a doily from white candlelight paper or plain white cardstock, cut the doily in half and put under the edge of the rim of the pot. Adhere sides and bottom but not top, this will give you a pocket.  Stamp, color, cut flowers, vines, bird, and tag. Glue ribbit colored prillls in the middle of each flower. Cut white cardstock insert to fit inside the pot with about 2.5″ sticking out the top. Assemble vines, flowers, bird as shown being careful to glue some flowers on the pot and some at the top of the insert (see picture) so that it all works together. Cut another doily from vellum this time, cut in half and glue to the back of the flowers. Tie a jute string on the stamped hello tag, glue in place so it hangs freely. Pull out the insert, write a message, and give to a friend! Happy crafting!

Have a beautiful day!


Birthday Wishes

Good morning! Today I have a “birthday wishes” card for you! The paper is gorgeous and is from the newly re-designed Lemoncraft “House of Roses” set. Instead of making my own flowers for this one, I used a variety of white, pink and pink/white mulberry flowers, with foliage from Cheery Lynn dies. This card is full of sweet, old fashioned beauty and is available in my Etsy shop, HydeParkHill.etsy.com!

Supplies and directions are below! Have a beautiful day!



birthday wishes pink and white full front view

Supplies: House of Roses 6″ x 6″ paper pad from Lemoncraft, mulberry flowers, clock face, birthday wishes die and leaves from Cheery Lynn, Prima Marketing Doily die cut, 110# white cardstock, 80# white cardstock, adhesive- both hot glue and dries clear liquid, dimensional foam, faux pearls, peeled paint Distress Ink, faux rhinestones, lace, distress-it all machine.

Directions: Using heavy white cardstock, make a 5.5″ square card base, select two pieces of complimentary paper from “House of Roses” paper pad, distress the edges. Cut your die pieces. Color leaves using a foam applicator with peeled paint ink. Layer all pieces with foam dimensional tape, decorate with flowers, leaves, lace, pearls, and rhinestones.



Fairy Tale Wedding

Good morning Monday!

Do you have many weddings to attend this summer? Here is a beautiful wedding card for you! I just love this horse and carriage die template from Tattered Lace! This card is not difficult, but it does take a bit of time because of all the layers. Enjoy!

Happy Crafting!


once in awhile full front view

Supplies: Once in a while stamp, staz-on Black ink, vellum, 110# white cardstock base cut for 5″ x 7″ card, 140# cold press watercolor paper, baroque stencil, modeling paste, embossing folder -swirl design, glitter, Spellbinders labels 17, Nestabilities Amazing Paper Grace Becca Feeken Ornamental Crest Etched Dies, Tattered Lace horse and carriage, Sue Wilson Dies – Scandinavian Collection – Copenhagen, rhinestone and pearl brooch, stick pins, foam tape, hot glue, dries clear adhesive, faux pearls, faux rhinestones, glitter paper, micro-fine clear or white glitter, candlelight paper, white cardstock, white tulle

Directions: We will work from the base of the card up to the top layer. Cut your card base from heavy white cardstock, cut silver glitter paper matt, cut next layer from candlelight paper and emboss with swirl design, cut Sue Wilson die from white cardstock with adhesive paper on it. after it’s die cut, peel off the adhesive cover and coat die cut with clear or white glitter. Use modeling paste on watercolor paper and sprinkle with glitter, set aside to dry. When dry, die cut piece with labels 17, use the die cut metal template to trace the shape onto the glitter paper and cut out by hand. This will give your watercolor piece a lovely size matt. Stamp sentiment on vellum, dry with heat tool and die cut with a smaller labels 17. Cut the Spellbinders ornamental crest die from white cardstock and cut in half. Layer all your pieces as shown with hot glue and foam tape to give it dimension. Be sure wrap tulle around your layers and make your bow, then adhere to your card base. Cut the horse and carriage die from candlelight paper and then cut 3 more times from heavy cardstock. Glue the layers together with the candlelight paper layer on top. Put dimensional foam tape on piece and some wet adhesive and glue into place. Stick the pins through the bow and attach brooch with hot glue. Embellish with faux pearls and rhinestones! Give to a dear friend this summer!

Happy Crafting!



Let’s Celebrate!

Let’s Celebrate! There are so many things to celebrate in life! Birthdays are one of my favorite things. Lately, I have been combining all my hobbies into one project. (see last week’s post: Morning has Broken Petunia Canvas Project) This new project combines two hobbies–paper crafting and pottery. In a future post, I will show how I use paper crafting stamps and fusing glass together.  In this birthday card, a hand-stamped, handmade ceramic piece was added to layers of die cuts makes for a uniquely rustic and beautiful card!

Supplies and directions below!

Lets celebrate front view2


Products Used: HFC Classic Petunia Stamp and Die sets, HFC Petunia Paper Pad, Designer Dries Clear Adhesive, Stamp Mat Pad, 6”x6” white card base, dark brown cardstock, candlelight cardstock, white cardstock, vellum, 140# watercolor paper, Staz-on Timber brown, Distress ink: Picked Raspberry, Squeezed Lemonade, Peeled Paint, Mowed Lawn, Forest Moss, faux pearls, Spellbinders Fleur de Elegance, Spellbinders Victorian Medallion 2, water brush, hot glue gun, “Let’s Celebrate” sign (see special note at the end of directions)

Instructions: Cut a 6”x 6” white card base, cut brown cardstock 5.75” x 5.75”, cut a paper pad paper 5.5” x 5.5”, cut one Victorian Medallion 2 out of the vellum- cut in half. Cut a Fleur de Elegance from candlelight paper and cut 3 more times from white cardstock and layer and adhere them together to make a stiff background piece. Cut the middle die from the Fleur set from watercolor paper 2 times- stamp one with the “It’s your Birthday” stamp in Staz-on Timber Brown ink. Stamp the petunia bouquet 3 times on watercolor paper with Staz-on Timber Brown. Color with Distress Ink colors, let dry, die cut and layer the 3 pieces with dimensional foam adhesive. Stamp the petunia corner stamp 4 times on watercolor paper with timber brown, color with distress inks and die cut. Stamp the petunia vine 1 time on watercolor paper with timber brown and color with distress inks, and die cut. Layer all your pieces starting with the brown, pink, medallion (cut in half so it sticks out from the sides of the frame) put the corner petunia pieces in, the middle piece, the side vine, the large bouquet. Adhere the piece to the card base. Assemble the inside of the card: Cut 1 piece of petunia paper pad 5.5” x 5.5”, put two corner petunia vines in opposite corners. Put the Fleur middle piece that was stamped with “It’s your Birthday” in the middle. Decorate front and inside with faux pearls. Give to a friend!

Special Note: The “Let’s Celebrate” sign was made with the HFC stamp and stoneware clay. I rolled out a piece of clay, stamped it, cut it out to look like a rustic woodland sign and gave it some wood texture with a carving tool. It was dried flat for a week, then bisque fired, then stained with iron oxide and fired to cone 5 in a kiln. If you don’t have access to pottery kiln, you can use polymer clay or layer 3 pieces of chipboard. There are always creative ways to achieve a similar look!

Let’s Celebrate!


Lets celebrate front viewLets celebrate close up2Lets celebrate sideviewLets celebrate inside


“Morning has Broken” Petunia Canvas

Good morning! What a lovely spring we are having! I have a special mixed media canvas for you today! My husband and I are fond of the song: “Morning has Broken”. It is an old hymn written in 1931 by an English Eleanor Fargeon and was made popular in 1971 when it was recorded by singer Cat Stevens. Later this week I will have tutorial about how to make this project.

What I love about this canvas is the song is literally bursting forth from the inside the canvas. It features the music and lyrics of the hymn and is full of the new “Classic Petunia” from Heartfelt Creations, as well as some glass and pottery elements I made in my ceramic and fused glass studio. It has a fused glass blackbird and the eggs are made from speckled brown clay.

Do you have a favorite song? You could make it into a mixed media canvas! It’s a fun creative project! Imagine the possibilities! Below are the supplies and directions! The directions are a bit long, but most of the “how to” is easy to see. (A picture says a thousand words!) Enjoy!


blackbird canvas front view
Full view of the canvas


“Morning has Broken” Petunia Garden Canvas

Products Used:  HFC Classic Petunia stamps and dies, Classic Petunia paper pad, Deluxe Flower Shaping Kit, HCST1-401 Stamp Mat Pad, Designer Dries Clear Adhesive, Bright Ideas Prills- you had me at yellow  ANC852


Other Supplies: 12” x 12” gallery canvas, satin mod podge/brush,  acrylic paint- Lime Green and Thao’s Green, White Gesso, thick modeling paste, crackle medium, moss, bird’s nest, eggs, Morning has Broken sheet music, Morning has Broken lyrics laser printed on vellum, Dries Clear Adhesive, Staz-on: Timber Brown Ink, Distress ink: Wilted Violet, Picked Raspberry, Peeled Paint, Mowed Lawn, Squeezed Lemonade, Vintage photo, Black Soot, a fused glass blackbird with 14 gauge copper legs (or craft bird), 140# cold press watercolor paper, Versa-mark watermark ink, charcoal embossing powder, bamboo skewer painted black, floral foam, glue gun, utility knife, heat tool, water brush, patience.

Instructions: Making the canvas takes a bit of time as it has to dry between layers. While it is drying, use your time in between to make your flowers, because there are lots of flowers in this project. Using a 12” x 12” gallery size canvas and using lime green and Thao’s green acrylic paint, paint the sides, back and inside wood by lightly spreading the two colors into each other. Set aside to dry. Choose a 12” x 12” paper from the classic petunia pad and adhere to the front of the canvas using satin mod podge both under and over the paper. Smooth out any air bubbles. You want it perfectly flat and adhered well. On the inside of the canvas glue a copy of the sheet music “Morning has Broken” that was laser printed on white copy paper. (If you use an ink jet printer, the ink will smear when you put glue on it.) When your canvas is dry, coat the outside sides and inside sides with crackle medium. Set aside to dry again.  After it is dry, put a thin coat of white gesso all over the front and a bit heavier coat of white on the sides—as the sides dry it should crack leaving an aged texture, with the green showing underneath. Let it completely dry, this takes couple of hours. With heavy modeling paste and a stencil of a branch and bird stencil on the upper right corner of the canvas. Using a brick stencil and modeling paste, stencil a brick pattern on the right hand side below the bird and all the way down the side to the bottom. Use a hexagon stencil for the upper left corner. Set the canvas aside to completely dry. Meanwhile, using watercolor paper stamp and die cut at least 10 sets of the classic petunias- all sizes, color with Distress Inks, spray with water and shape, set them aside to dry. Cut stamens, ink, and roll into shape, coat tips with glue and dip in Prills, set aside to dry. Stamp and die cut v-shaped hanging basket from the Classic Petunia onto watercolor paper using Versa-mark water mark ink and sprinkle with charcoal embossing powder, heat set, and color petunias with ink. Die cut the basket with black cardstock 4 more times and adhere all the layers to the back of the first one. Paint the bamboo skewer black with black acrylic, after it dries glue the basket to the skewer and set aside to dry. Your canvas should be dry by now. (It helps to let it dry overnight before cutting it.) Take a utility knife and carefully cut your canvas- like you are cutting a pie. Roll back the pieces so it looks like it burst open, once bent they will stay that way and the music you glued on the inside will show. In the inside bottom of the canvas secure the floral foam with hot glue and cover with moss. Insert bird, nest, eggs, and bamboo skewer. Prepare your background piece. Cut a 12” x 12“ paper from the Classic Petunia paper pad to 11” x 11”, adhere to a sturdy piece of 11” x 11” chipboard with mod podge, adhere vellum lyrics piece (Put a thin half inch wide line of mod podge along the top and bottom of the vellum and adhere it to the background paper. The vellum will want to wrinkle, don’t get it too wet with the glue. Hot glue the background piece to the back of canvas by putting the hot glue on the wood part of the canvas and lining up the top of the backdrop piece and slowly lay it on the back. Carefully do this, because once it is down with hot glue, it isn’t going to be able to be “adjusted”. Start to decorate the canvas! Arrange flowers as shown all around. I made my fused glass bird from black fusing glass and I made the eggs from speckled clay that left unglazed and I fired to cone 5. Feel free to substitute! You can use a paper bird or a craft bird & craft eggs from a craft store. After it’s all decorated, put on the back hanger. It might not go in the middle because of the weight of different objects. Hang your canvas or set on a shelf and enjoy, a vision of a spring morning bursting forth in song!




He lives!

It’s Good Friday! But Sunday is coming!

Here is a lovely Resurrection Sunday card! As always, supplies and directions are listed below! Heartfelt Creations Dogwood Collection makes this card so lovely, so full of spring, and so full of life! He is risen, indeed!


5″ x 7″ Dogwood Wreath Card

Supplies: HFC Flowering Dogwood stamp and dies, Dogwood Chapel Stamps, Flowering Dogwood and Doves Stamps and Dies, Delicate Border Basics, Flowering Dogwood Paper Pad, Spellbinders Wreath Die, Spellbinders Vine Embossing Folder, Spellbinders Renaissance Tags 2, Spellbinders Circle die, dimensional foam adhesive, Walnut Stamp Paint, Ribbit Prills, Dries Clear Adhesive, hot glue, Cold Press 140# watercolor paper (I use Strathmore), 110# White cardstock, Memento Ink: Rhubarb Stalk, Distress Ink: Peeled Paint, Vintage Photo, Victorian Velvet, Staz-On Ink: Timber Brown and Jet Black, white feather, faux pearls, paper trimmer, flower shaping tools, water brush, scissors, die cut machine

Directions: Using Staz-On Ink Timber Brown, stamp all your flowers and leaves on the watercolor paper, cut out with coordinating dies. Spray lightly with water and ink using Peeled Paint, Victoria Velvet, and highlight the edge of the dogwood petals with the Rhubarb Stalk. Shape the flowers while they are wet, set aside to dry. When dry add Ribbit Prills to the middles with Dries Clear Glue. Stamp your cross scene on watercolor paper, fussy cut around the crosses and around the hills, color with Distress Inks. Cut a “Delicate Border Die” from watercolor paper and adhere it to the back of the 3 crosses scene. Cut your wreath die 3 times, glue layers together and cover with Walnut Stamp Paint, set aside to dry. Cut one piece of 4.5” x 6.6” piece of water-color paper, cut a large circle one half-inch from the top. Lightly spray with water and emboss. Lightly wipe “Peeled Paint” Distress Ink over the paper with a sponge dauber, highlighting the vine/leaf design. With Staz-On Jet Black Ink stamp and cut a dove, add a white feather to the tail with hot glue and put a pop up dot under the body. Stamp “He lives!” sentiment on watercolor paper and cut with tag die. Cut a 5” x7” hinged card base from 110# white cardstock. To make a hinged from the top 5” x7” hinged card base cut 1 piece 5” x 7” and cut another piece 5” x 8”. Score one inch down from the top and bend and adhere to the other piece. Cut two Delicate Borders from 140# cold press watercolor paper, adhere to the sides of the front panel. Cut a light blue piece 5”x 7” from the Flowering Dogwood Paper Pad and adhere to the front of the card. Assemble the remaining pieces of your card: Glue the three crosses piece behind the circle cut out, put 3D pop up dots on backside of entire embossed piece and mount. Put 3D pop up dots put on the wreath and mount on the outside of the circle, stick in a small branch of dogwood flowers on the hill below the crosses. Cut a small dogwood flower from a branch and put it on the middle cross. Decorate the wreath with the flowers, leaves, and the dove. Decorate tag with flowers and leaves, use pop dots and mount the tag under the wreath as shown.

Have a beautiful Easter weekend!





Heartfelt Creations Semifinalist!

I am so excited to announce I have been chosen as a Heartfelt Creations Design Team Semifinalist! This has been long term dream of mine!

Below are the three projects I submitted! Birch Bark and Roses, 2 Lovely Doves Wedding Card and He is Risen Dogwood Card. You can click on the pictures to enlarge them. If you keep scrolling, there are other blog posts with supplies and directions for two of these projects.

Please take a moment to vote for me! Here is the link to the Heartfelt Creations Blog Post about voting for the semifinalists! https://www.heartfeltcreations.us/blog/538/21-joyful-springtime-paper-crafting-ideas-sneak-peek-2017-design-team-semifinalists-announced


Have a lovely day and thank you for visiting my blog and thank you for voting!

Have a crafty day!